And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.883
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.595
And
I accept adding "cowsay" to Additional Software
4.786
And
Additional Software is correctly configured for package "cowsay"
0.532
And
I shutdown Tails and wait for the computer to power off
7.854
And
I start Tails from USB drive "__internal" with network unplugged
36.597
And
I enable persistence
6.348
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
8.844
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.013
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.984
And
I can open the Additional Software configuration window from the notification
2.535
And
I shutdown Tails and wait for the computer to power off
13.132
And
I start Tails from USB drive "__internal" with network unplugged
35.998
And
I enable persistence
5.484
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.313
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057