And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.101
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.158
And
I accept adding "cowsay" to Additional Software
5.028
And
Additional Software is correctly configured for package "cowsay"
0.784
And
I shutdown Tails and wait for the computer to power off
4.329
And
I start Tails from USB drive "__internal" with network unplugged
41.241
And
I enable persistence
8.494
And
I configure APT to prefer an old version of cowsay
0.018
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
13.149
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.261
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.016
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.060
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
23.642
And
I start Tails from USB drive "__internal" with network unplugged
39.863
And
I enable persistence
6.641
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.724
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073