And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.803
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.321
And
I accept adding "cowsay" to Additional Software
4.961
And
Additional Software is correctly configured for package "cowsay"
0.739
And
I shutdown Tails and wait for the computer to power off
8.548
And
I start Tails from USB drive "__internal" with network unplugged
38.676
And
I enable persistence
6.980
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
12.048
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.019
And
available upgrades have been checked
2.191
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.033
And
I can open the Additional Software configuration window from the notification
2.558
And
I shutdown Tails and wait for the computer to power off
13.805
And
I start Tails from USB drive "__internal" with network unplugged
39.059
And
I enable persistence
6.983
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.622
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.105
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065