And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.405
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.531
And
I accept adding "cowsay" to Additional Software
4.851
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
7.980
And
I start Tails from USB drive "__internal" with network unplugged
37.645
And
I enable persistence
6.812
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
11.639
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.022
And
available upgrades have been checked
2.225
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.560
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
17.732
And
I start Tails from USB drive "__internal" with network unplugged
38.966
And
I enable persistence
6.770
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.203
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057