And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.633
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.522
And
I accept adding "cowsay" to Additional Software
3.636
And
Additional Software is correctly configured for package "cowsay"
0.702
And
I shutdown Tails and wait for the computer to power off
8.079
And
I start Tails from USB drive "__internal" with network unplugged
35.459
And
I enable persistence
5.528
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.873
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
3.197
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.404
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
17.020
And
I start Tails from USB drive "__internal" with network unplugged
35.956
And
I enable persistence
6.306
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.575
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.086
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078