And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.856
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.195
And
I accept adding "cowsay" to Additional Software
4.984
And
Additional Software is correctly configured for package "cowsay"
0.795
And
I shutdown Tails and wait for the computer to power off
4.237
And
I start Tails from USB drive "__internal" with network unplugged
37.611
And
I enable persistence
6.977
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.852
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.604
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.014
And
available upgrades have been checked
1.121
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.561
And
I can open the Additional Software configuration window from the notification
2.623
And
I shutdown Tails and wait for the computer to power off
17.585
And
I start Tails from USB drive "__internal" with network unplugged
38.068
And
I enable persistence
6.538
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.218
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.280
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075