And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.389
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.775
And
I accept adding "cowsay" to Additional Software
5.154
And
Additional Software is correctly configured for package "cowsay"
0.698
And
I shutdown Tails and wait for the computer to power off
8.256
And
I start Tails from USB drive "__internal" with network unplugged
38.142
And
I enable persistence
6.322
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
10.265
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.014
And
available upgrades have been checked
3.226
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.445
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
17.524
And
I start Tails from USB drive "__internal" with network unplugged
36.959
And
I enable persistence
5.375
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.091
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.488
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066