And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.277
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.579
And
I accept adding "cowsay" to Additional Software
3.732
And
Additional Software is correctly configured for package "cowsay"
0.699
And
I shutdown Tails and wait for the computer to power off
4.206
And
I start Tails from USB drive "__internal" with network unplugged
35.338
And
I enable persistence
5.562
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.297
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.013
And
available upgrades have been checked
3.238
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.433
And
I can open the Additional Software configuration window from the notification
2.486
And
I shutdown Tails and wait for the computer to power off
17.015
And
I start Tails from USB drive "__internal" with network unplugged
35.729
And
I enable persistence
5.460
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.955
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071