And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.267
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.403
And
I accept adding "cowsay" to Additional Software
3.632
And
Additional Software is correctly configured for package "cowsay"
0.656
And
I shutdown Tails and wait for the computer to power off
7.828
And
I start Tails from USB drive "__internal" with network unplugged
36.141
And
I enable persistence
5.609
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
9.018
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.022
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.463
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
18.526
And
I start Tails from USB drive "__internal" with network unplugged
35.942
And
I enable persistence
6.347
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.835
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073