And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.009
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.191
And
I accept adding "cowsay" to Additional Software
3.658
And
Additional Software is correctly configured for package "cowsay"
0.582
And
I shutdown Tails and wait for the computer to power off
8.241
And
I start Tails from USB drive "__internal" with network unplugged
35.971
And
I enable persistence
6.506
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.149
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.491
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.028
And
available upgrades have been checked
1.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.006
And
I can open the Additional Software configuration window from the notification
2.534
And
I shutdown Tails and wait for the computer to power off
17.088
And
I start Tails from USB drive "__internal" with network unplugged
35.824
And
I enable persistence
5.590
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.416
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057