And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.226
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.802
And
I accept adding "cowsay" to Additional Software
5.044
And
Additional Software is correctly configured for package "cowsay"
0.709
And
I shutdown Tails and wait for the computer to power off
8.039
And
I start Tails from USB drive "__internal" with network unplugged
37.649
And
I enable persistence
5.688
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
11.134
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.016
And
available upgrades have been checked
2.187
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.014
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
17.477
And
I start Tails from USB drive "__internal" with network unplugged
37.191
And
I enable persistence
5.325
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.287
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084