And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.040
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.486
And
I accept adding "cowsay" to Additional Software
3.619
And
Additional Software is correctly configured for package "cowsay"
0.582
And
I shutdown Tails and wait for the computer to power off
7.791
And
I start Tails from USB drive "__internal" with network unplugged
35.067
And
I enable persistence
5.507
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.208
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.015
And
available upgrades have been checked
3.195
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.428
And
I can open the Additional Software configuration window from the notification
2.498
And
I shutdown Tails and wait for the computer to power off
17.091
And
I start Tails from USB drive "__internal" with network unplugged
35.698
And
I enable persistence
5.290
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.870
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073