And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.078
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.645
And
I accept adding "cowsay" to Additional Software
3.715
And
Additional Software is correctly configured for package "cowsay"
0.653
And
I shutdown Tails and wait for the computer to power off
4.133
And
I start Tails from USB drive "__internal" with network unplugged
36.688
And
I enable persistence
5.532
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.421
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.017
And
available upgrades have been checked
3.262
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.433
And
I can open the Additional Software configuration window from the notification
2.598
And
I shutdown Tails and wait for the computer to power off
17.184
And
I start Tails from USB drive "__internal" with network unplugged
36.132
And
I enable persistence
6.633
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.073
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099