And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.196
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.719
And
I accept adding "cowsay" to Additional Software
4.841
And
Additional Software is correctly configured for package "cowsay"
0.622
And
I shutdown Tails and wait for the computer to power off
4.060
And
I start Tails from USB drive "__internal" with network unplugged
37.775
And
I enable persistence
6.643
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.655
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.016
And
available upgrades have been checked
3.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.450
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
8.003
And
I start Tails from USB drive "__internal" with network unplugged
38.170
And
I enable persistence
5.398
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
12.532
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065