And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.727
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.168
And
I accept adding "cowsay" to Additional Software
4.928
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
8.234
And
I start Tails from USB drive "__internal" with network unplugged
37.026
And
I enable persistence
6.901
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.121
And
I log in to a new session
10.577
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.015
And
available upgrades have been checked
2.154
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.495
And
I can open the Additional Software configuration window from the notification
2.602
And
I shutdown Tails and wait for the computer to power off
17.407
And
I start Tails from USB drive "__internal" with network unplugged
37.520
And
I enable persistence
6.703
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.319
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087