And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.274
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.557
And
I accept adding "cowsay" to Additional Software
4.889
And
Additional Software is correctly configured for package "cowsay"
0.797
And
I shutdown Tails and wait for the computer to power off
8.293
And
I start Tails from USB drive "__internal" with network unplugged
38.853
And
I enable persistence
6.397
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
11.397
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.016
And
available upgrades have been checked
2.157
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.990
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
17.576
And
I start Tails from USB drive "__internal" with network unplugged
38.430
And
I enable persistence
5.629
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.194
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061