And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.156
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.564
And
I accept adding "cowsay" to Additional Software
3.669
And
Additional Software is correctly configured for package "cowsay"
0.615
And
I shutdown Tails and wait for the computer to power off
8.020
And
I start Tails from USB drive "__internal" with network unplugged
36.837
And
I enable persistence
5.490
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.101
And
I log in to a new session
9.664
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.020
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.437
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
22.142
And
I start Tails from USB drive "__internal" with network unplugged
36.567
And
I enable persistence
6.341
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.039
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081