And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.585
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.485
And
I accept adding "cowsay" to Additional Software
3.649
And
Additional Software is correctly configured for package "cowsay"
0.632
And
I shutdown Tails and wait for the computer to power off
7.816
And
I start Tails from USB drive "__internal" with network unplugged
36.451
And
I enable persistence
6.211
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
9.687
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.014
And
available upgrades have been checked
2.170
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.433
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
18.422
And
I start Tails from USB drive "__internal" with network unplugged
36.285
And
I enable persistence
5.513
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060