And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.827
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.604
And
I accept adding "cowsay" to Additional Software
4.926
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
8.007
And
I start Tails from USB drive "__internal" with network unplugged
37.017
And
I enable persistence
6.751
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.413
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.017
And
available upgrades have been checked
2.165
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.464
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
23.340
And
I start Tails from USB drive "__internal" with network unplugged
37.324
And
I enable persistence
6.473
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.973
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067