And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.194
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.500
And
I accept adding "cowsay" to Additional Software
4.888
And
Additional Software is correctly configured for package "cowsay"
0.734
And
I shutdown Tails and wait for the computer to power off
4.000
And
I start Tails from USB drive "__internal" with network unplugged
35.361
And
I enable persistence
5.357
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.632
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.018
And
available upgrades have been checked
3.279
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.427
And
I can open the Additional Software configuration window from the notification
2.533
And
I shutdown Tails and wait for the computer to power off
17.116
And
I start Tails from USB drive "__internal" with network unplugged
36.396
And
I enable persistence
5.522
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.804
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.536
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088