And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.169
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.614
And
I accept adding "cowsay" to Additional Software
3.623
And
Additional Software is correctly configured for package "cowsay"
0.537
And
I shutdown Tails and wait for the computer to power off
7.813
And
I start Tails from USB drive "__internal" with network unplugged
35.781
And
I enable persistence
5.583
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.028
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.019
And
available upgrades have been checked
2.189
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.462
And
I can open the Additional Software configuration window from the notification
2.507
And
I shutdown Tails and wait for the computer to power off
22.216
And
I start Tails from USB drive "__internal" with network unplugged
36.322
And
I enable persistence
5.475
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.986
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058