And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.280
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.624
And
I accept adding "cowsay" to Additional Software
4.997
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.209
And
I start Tails from USB drive "__internal" with network unplugged
38.430
And
I enable persistence
6.727
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
11.856
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.018
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.034
And
I can open the Additional Software configuration window from the notification
2.615
And
I shutdown Tails and wait for the computer to power off
17.564
And
I start Tails from USB drive "__internal" with network unplugged
38.337
And
I enable persistence
6.606
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.751
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061