And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.416
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.268
And
I accept adding "cowsay" to Additional Software
4.897
And
Additional Software is correctly configured for package "cowsay"
0.754
And
I shutdown Tails and wait for the computer to power off
8.932
And
I start Tails from USB drive "__internal" with network unplugged
41.033
And
I enable persistence
11.256
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.674
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.288
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.017
And
available upgrades have been checked
2.245
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.000
And
I can open the Additional Software configuration window from the notification
2.645
And
I shutdown Tails and wait for the computer to power off
23.734
And
I start Tails from USB drive "__internal" with network unplugged
40.428
And
I enable persistence
10.662
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.792
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073