And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.469
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.620
And
I accept adding "cowsay" to Additional Software
3.593
And
Additional Software is correctly configured for package "cowsay"
0.610
And
I shutdown Tails and wait for the computer to power off
8.082
And
I start Tails from USB drive "__internal" with network unplugged
35.761
And
I enable persistence
9.941
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.173
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.019
And
available upgrades have been checked
2.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.408
And
I can open the Additional Software configuration window from the notification
2.515
And
I shutdown Tails and wait for the computer to power off
22.782
And
I start Tails from USB drive "__internal" with network unplugged
35.648
And
I enable persistence
8.755
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.600
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071