And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.495
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.818
And
I accept adding "cowsay" to Additional Software
4.938
And
Additional Software is correctly configured for package "cowsay"
0.606
And
I shutdown Tails and wait for the computer to power off
7.120
And
I start Tails from USB drive "__internal" with network unplugged
38.262
And
I enable persistence
10.706
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.662
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.021
And
available upgrades have been checked
1.149
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.065
And
I can open the Additional Software configuration window from the notification
2.490
And
I shutdown Tails and wait for the computer to power off
18.082
And
I start Tails from USB drive "__internal" with network unplugged
38.054
And
I enable persistence
10.564
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
10.606
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.277
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073