And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.103
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.832
And
I accept adding "cowsay" to Additional Software
4.891
And
Additional Software is correctly configured for package "cowsay"
0.645
And
I shutdown Tails and wait for the computer to power off
8.736
And
I start Tails from USB drive "__internal" with network unplugged
39.583
And
I enable persistence
10.954
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.600
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.023
And
available upgrades have been checked
2.213
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.066
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.898
And
I start Tails from USB drive "__internal" with network unplugged
37.062
And
I enable persistence
9.999
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.814
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.679
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.049
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076