And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.563
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.151
And
I accept adding "cowsay" to Additional Software
6.205
And
Additional Software is correctly configured for package "cowsay"
0.617
And
I shutdown Tails and wait for the computer to power off
8.372
And
I start Tails from USB drive "__internal" with network unplugged
41.532
And
I enable persistence
11.509
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
12.988
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.277
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.020
And
available upgrades have been checked
1.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.561
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
23.130
And
I start Tails from USB drive "__internal" with network unplugged
39.816
And
I enable persistence
12.154
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.728
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085