And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.520
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.836
And
I accept adding "cowsay" to Additional Software
4.796
And
Additional Software is correctly configured for package "cowsay"
0.724
And
I shutdown Tails and wait for the computer to power off
4.762
And
I start Tails from USB drive "__internal" with network unplugged
39.890
And
I enable persistence
10.342
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
10.278
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.015
And
available upgrades have been checked
2.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.981
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
22.170
And
I start Tails from USB drive "__internal" with network unplugged
39.997
And
I enable persistence
11.853
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.259
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082