And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.743
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.197
And
I accept adding "cowsay" to Additional Software
4.986
And
Additional Software is correctly configured for package "cowsay"
0.815
And
I shutdown Tails and wait for the computer to power off
4.564
And
I start Tails from USB drive "__internal" with network unplugged
37.886
And
I enable persistence
11.428
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
10.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.600
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.017
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.016
And
I can open the Additional Software configuration window from the notification
3.559
And
I shutdown Tails and wait for the computer to power off
17.815
And
I start Tails from USB drive "__internal" with network unplugged
37.943
And
I enable persistence
11.008
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
12.006
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.501
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071