And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.322
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.269
And
I accept adding "cowsay" to Additional Software
4.996
And
Additional Software is correctly configured for package "cowsay"
0.654
And
I shutdown Tails and wait for the computer to power off
8.204
And
I start Tails from USB drive "__internal" with network unplugged
40.099
And
I enable persistence
11.616
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.047
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.572
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.016
And
available upgrades have been checked
2.236
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.981
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
18.311
And
I start Tails from USB drive "__internal" with network unplugged
40.043
And
I enable persistence
9.924
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.571
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067