And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.812
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.103
And
I accept adding "cowsay" to Additional Software
6.176
And
Additional Software is correctly configured for package "cowsay"
0.662
And
I shutdown Tails and wait for the computer to power off
8.543
And
I start Tails from USB drive "__internal" with network unplugged
39.552
And
I enable persistence
11.394
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.725
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.594
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.017
And
available upgrades have been checked
2.210
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.536
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
22.848
And
I start Tails from USB drive "__internal" with network unplugged
40.049
And
I enable persistence
11.255
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.244
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091