And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.257
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.660
And
I accept adding "cowsay" to Additional Software
3.702
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
2.829
And
I start Tails from USB drive "__internal" with network unplugged
36.294
And
I enable persistence
9.869
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.213
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.016
And
available upgrades have been checked
2.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.412
And
I can open the Additional Software configuration window from the notification
2.558
And
I shutdown Tails and wait for the computer to power off
17.587
And
I start Tails from USB drive "__internal" with network unplugged
36.295
And
I enable persistence
9.592
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.085
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073