And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.335
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.630
And
I accept adding "cowsay" to Additional Software
4.996
And
Additional Software is correctly configured for package "cowsay"
0.735
And
I shutdown Tails and wait for the computer to power off
8.582
And
I start Tails from USB drive "__internal" with network unplugged
38.377
And
I enable persistence
11.265
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
10.282
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.965
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
18.555
And
I start Tails from USB drive "__internal" with network unplugged
37.739
And
I enable persistence
10.349
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.033
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098