And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.012
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.874
And
I accept adding "cowsay" to Additional Software
3.785
And
Additional Software is correctly configured for package "cowsay"
0.703
And
I shutdown Tails and wait for the computer to power off
4.468
And
I start Tails from USB drive "__internal" with network unplugged
37.488
And
I enable persistence
10.318
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.105
And
I log in to a new session
10.489
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.019
And
available upgrades have been checked
3.199
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.441
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
12.840
And
I start Tails from USB drive "__internal" with network unplugged
38.430
And
I enable persistence
10.220
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.338
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074