And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.009
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.595
And
I accept adding "cowsay" to Additional Software
4.941
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
2.777
And
I start Tails from USB drive "__internal" with network unplugged
38.260
And
I enable persistence
9.414
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.436
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.541
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.016
And
available upgrades have been checked
2.187
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.397
And
I can open the Additional Software configuration window from the notification
2.524
And
I shutdown Tails and wait for the computer to power off
17.882
And
I start Tails from USB drive "__internal" with network unplugged
37.399
And
I enable persistence
10.011
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.480
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108