And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.222
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.657
And
I accept adding "cowsay" to Additional Software
3.680
And
Additional Software is correctly configured for package "cowsay"
0.820
And
I shutdown Tails and wait for the computer to power off
8.716
And
I start Tails from USB drive "__internal" with network unplugged
37.502
And
I enable persistence
9.136
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.014
And
available upgrades have been checked
2.171
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.556
And
I can open the Additional Software configuration window from the notification
2.608
And
I shutdown Tails and wait for the computer to power off
22.133
And
I start Tails from USB drive "__internal" with network unplugged
38.178
And
I enable persistence
10.617
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.181
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068