And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.450
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.524
And
I accept adding "cowsay" to Additional Software
4.918
And
Additional Software is correctly configured for package "cowsay"
0.590
And
I shutdown Tails and wait for the computer to power off
8.373
And
I start Tails from USB drive "__internal" with network unplugged
36.552
And
I enable persistence
10.315
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
9.879
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.013
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.001
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
12.167
And
I start Tails from USB drive "__internal" with network unplugged
36.777
And
I enable persistence
9.178
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073