And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.792
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.865
And
I accept adding "cowsay" to Additional Software
3.651
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
8.312
And
I start Tails from USB drive "__internal" with network unplugged
37.140
And
I enable persistence
9.231
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.111
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.448
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
21.910
And
I start Tails from USB drive "__internal" with network unplugged
37.377
And
I enable persistence
10.283
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.297
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075