And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.186
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.807
And
I accept adding "cowsay" to Additional Software
4.864
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
8.396
And
I start Tails from USB drive "__internal" with network unplugged
39.368
And
I enable persistence
10.685
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.016
And
available upgrades have been checked
2.169
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.974
And
I can open the Additional Software configuration window from the notification
2.739
And
I shutdown Tails and wait for the computer to power off
12.793
And
I start Tails from USB drive "__internal" with network unplugged
40.011
And
I enable persistence
11.050
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.988
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065