And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.555
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.350
And
I accept adding "cowsay" to Additional Software
3.637
And
Additional Software is correctly configured for package "cowsay"
0.597
And
I shutdown Tails and wait for the computer to power off
8.035
And
I start Tails from USB drive "__internal" with network unplugged
35.476
And
I enable persistence
10.007
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.044
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.961
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
17.176
And
I start Tails from USB drive "__internal" with network unplugged
35.713
And
I enable persistence
9.337
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
9.550
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057