And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.693
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.600
And
I accept adding "cowsay" to Additional Software
3.647
And
Additional Software is correctly configured for package "cowsay"
0.542
And
I shutdown Tails and wait for the computer to power off
3.957
And
I start Tails from USB drive "__internal" with network unplugged
35.388
And
I enable persistence
8.943
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.418
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.045
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.438
And
I can open the Additional Software configuration window from the notification
2.515
And
I shutdown Tails and wait for the computer to power off
17.047
And
I start Tails from USB drive "__internal" with network unplugged
35.830
And
I enable persistence
8.616
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.360
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073