And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.745
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.696
And
I accept adding "cowsay" to Additional Software
4.980
And
Additional Software is correctly configured for package "cowsay"
0.613
And
I shutdown Tails and wait for the computer to power off
4.160
And
I start Tails from USB drive "__internal" with network unplugged
36.805
And
I enable persistence
9.182
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
10.092
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.019
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.968
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
22.584
And
I start Tails from USB drive "__internal" with network unplugged
37.878
And
I enable persistence
10.268
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.629
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093