And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.954
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.839
And
I accept adding "cowsay" to Additional Software
3.658
And
Additional Software is correctly configured for package "cowsay"
0.582
And
I shutdown Tails and wait for the computer to power off
4.068
And
I start Tails from USB drive "__internal" with network unplugged
35.219
And
I enable persistence
9.338
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.460
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.016
And
available upgrades have been checked
1.149
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.004
And
I can open the Additional Software configuration window from the notification
2.531
And
I shutdown Tails and wait for the computer to power off
13.284
And
I start Tails from USB drive "__internal" with network unplugged
35.598
And
I enable persistence
9.121
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.939
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.559
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070