And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.551
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.951
And
I accept adding "cowsay" to Additional Software
4.832
And
Additional Software is correctly configured for package "cowsay"
0.808
And
I shutdown Tails and wait for the computer to power off
4.287
And
I start Tails from USB drive "__internal" with network unplugged
37.034
And
I enable persistence
10.736
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.017
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.479
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
8.059
And
I start Tails from USB drive "__internal" with network unplugged
37.914
And
I enable persistence
9.597
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.729
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052