And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.030
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.395
And
I accept adding "cowsay" to Additional Software
3.638
And
Additional Software is correctly configured for package "cowsay"
0.678
And
I shutdown Tails and wait for the computer to power off
4.381
And
I start Tails from USB drive "__internal" with network unplugged
35.591
And
I enable persistence
10.008
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.259
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.015
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.484
And
I can open the Additional Software configuration window from the notification
2.619
And
I shutdown Tails and wait for the computer to power off
22.140
And
I start Tails from USB drive "__internal" with network unplugged
35.598
And
I enable persistence
8.486
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.832
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068