And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.390
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.328
And
I accept adding "cowsay" to Additional Software
3.755
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.216
And
I start Tails from USB drive "__internal" with network unplugged
36.573
And
I enable persistence
9.919
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
10.578
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.016
And
available upgrades have been checked
2.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.491
And
I can open the Additional Software configuration window from the notification
2.564
And
I shutdown Tails and wait for the computer to power off
22.419
And
I start Tails from USB drive "__internal" with network unplugged
36.897
And
I enable persistence
10.446
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.145
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062