And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.424
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.852
And
I accept adding "cowsay" to Additional Software
3.684
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
4.069
And
I start Tails from USB drive "__internal" with network unplugged
35.569
And
I enable persistence
8.782
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
8.949
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.016
And
available upgrades have been checked
2.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.396
And
I can open the Additional Software configuration window from the notification
2.503
And
I shutdown Tails and wait for the computer to power off
22.326
And
I start Tails from USB drive "__internal" with network unplugged
35.093
And
I enable persistence
9.104
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.236
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048