And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.999
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.580
And
I accept adding "cowsay" to Additional Software
3.588
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
7.923
And
I start Tails from USB drive "__internal" with network unplugged
35.804
And
I enable persistence
9.724
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
8.567
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.015
And
available upgrades have been checked
2.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.040
And
I can open the Additional Software configuration window from the notification
2.646
And
I shutdown Tails and wait for the computer to power off
18.243
And
I start Tails from USB drive "__internal" with network unplugged
35.328
And
I enable persistence
9.819
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.216
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053