And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.723
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
17.808
And
I accept adding "cowsay" to Additional Software
4.886
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
4.051
And
I start Tails from USB drive "__internal" with network unplugged
36.595
And
I enable persistence
9.805
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.514
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.496
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.022
And
available upgrades have been checked
1.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.963
And
I can open the Additional Software configuration window from the notification
2.588
And
I shutdown Tails and wait for the computer to power off
22.641
And
I start Tails from USB drive "__internal" with network unplugged
37.639
And
I enable persistence
10.840
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.596
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092