And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.302
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.264
And
I accept adding "cowsay" to Additional Software
4.831
And
Additional Software is correctly configured for package "cowsay"
0.608
And
I shutdown Tails and wait for the computer to power off
8.006
And
I start Tails from USB drive "__internal" with network unplugged
36.838
And
I enable persistence
10.568
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
10.820
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.014
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.515
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
22.872
And
I start Tails from USB drive "__internal" with network unplugged
38.823
And
I enable persistence
9.764
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058